Enable your scale to auto-print to your mobile device every second so that you don't have to! Part of the Touchless Harvesting magic.

Prerequisites

• Must have an Ohaus Scale, this article covers the Ohaus Ranger 3000 instructions

• Ranger 3000 should not be in LFT mode, see switch on underside of scale. If the scale is is LFT mode, the Auto Print function is disabled. If the scale has already been sealed by your local government office, it will need to be unsealed in order set up auto-print.

• Must have the Trym Mobile Wireless Communication Adapter Kit, purchasing info available on our Hardware Guide

• Must have connected bluetooth adapter to scale

Instructions

1. Ensure that the scale and bluetooth adapter are connected to power

2. Power on the scale. Press and hold the On/Zero button, first from the left, until the scale turns on.

3. Hold the M+ / Menu button, fourth from the left, for a couple of seconds until the screen changes to first menu option

4. Press the Print/Units button, second from left, 5 times until you see the "Print" menu

5. Press the On/Zero button, first from left, once to enter the "Print" menu

6. Press the Print/Units button, second from left, 2 times until you see the "APrint" menu

7. Press the On/Zero button, first from left, once to enter the "APrint" menu

8. Press the Print/Units button, second from left, 2 times until you see the "Inter" menu

9. Press the On/Zero button, first from left, once to enter the "Inter" menu

10. The screen will display a "1", press Press the On/Zero button, first from left, once to accept the value

11. Press the M+ / Menu button, fourth from the left, to exit

Video

Related Articles

• Connect your mobile device to your scale

• How-to connect the bluetooth adapter to your scale